Sus304 Johson screen pipe for filter
Johnson screen pipe Introduction
Johnson Screen Filter pipe, also known as the filter pipe, the use of lowalloy steel as the material, by dozens of support bars and trapezoidal section of the winding wire for spot welding processing.High compressive strength, with high strength and stiffness, the average tensile resistance of a single solder joint to 2000 N. The surface is smooth, the gap is uniform,not easy to block the hole, and the filter is evenly sprayed with high-strength non-toxic industrial plastics, in order to enhance the acid and alkali resistance of the filter, and can reduce the electrochemical reaction and biochemical reaction.
Johnson screen pipe Features
1. V-Shaped Slots —Openings shaped like a "v" that open toward the inside of the well tend to allow the particles that are justbarely smaller than the width of the slot pass.
2. Very Large Open Area — This design gives continuous slot and hence the open area for water to enter is more than 2 timesthat of conventional slotted pipes of any size and slot opening.
Johnson screen pipe Material
| Slot size | 0.02mm-30mm |
| Material | stainless steel 304 316L 201 or other customized material |
| Opening rate | 60% |
| Ou diameter | 19mm-1000mm |
| Length | up to 6m |
| Connected Ends Type | Welding rings,Flanges,With Female&Malea Threads |
Reverse Winding Wire Screen Tube
reverse winding wire screen tube is made of stainless steel wedge wire and T wire back winding welding. Its characteristic is that the filter surface can handle the sewage treatment from inside to outside very well.
Packing
|
|
Sus304 Johson screen pipe for filter Images
|
